- Place of Origin:CN;LIA
- Type:Variable Area Water Flowmeters
- Brand Name:TEREN
- Model Number:EMF
- Model:EMF8700
- Principle:Faraday electromagnetic induction
- Accuracy:0.2% 0.3% 0.5%
- Diameter:DN15~DN3000
- Max flow rate:15m/s
- Fluid conductivity:≥5uS/cm
- Protection grade:IP65
- Communication:RS485(optional, modbus protocol)
- Lining:rubber/PTFE
- output current:4~20mA
Electromagnetic Flowmeter
Electromagnetic Flowmeter is a kind of high precision, high reliability and service life long flow meter, is consist of sensor and upper signal converter,has been widely used in chemical industry, environmental protection, metallurgy, medicine, paper making, water supply and drainage and other industrial technology and management department.
Significant characteristics:
1 High stability, high precision
2 Adopting intermittent excitation, battery life of 6 years
3 GPRS communication, short message packet form to transfer the date to the upper layer network4 Logging date, monthly data, data and query logs
Technology parameter
Item | Standard |
Measure range | 0.14~113040 m3/h |
Diameter | Pipeline ptfe lining: DN10~DN600 Pipeline rubber lining:DN40~DN2000 |
Accuracy grade | Grade1 or grade 0.5 |
Turn down | 150:1 |
Repeatability precision | ±0.1% |
Operate temperature | General rubber lining:-20°C ~+60°C High temperature rubber lining:-20°C ~+90°C General ptfe lining:-30°C ~+120°C High temperature ptfe lining:-20°C ~+160°C |
Operate press | DN10~DN25 ≤4.0MPa DN32~DN150 ≤1.6MPa DN200~DN600 ≤1.0MPa DN700~DN2000 ≤0.6MPa |
Flow range | 0.1~15m/s |
power supply | 220VAC,allow 15% error or +24VDC ripple≤5% |
Single output | 4-20mA,pulse/rate |
Communication output | RS485 MODBUS HART Profibus-DP |
Material of measuring pipe | chloroprene rubber, polyurethane,PTFE,PFA,F46 and some other Decay resistance materials |
Material of measuring electrode | 316Lstainlesssteel,titanium alloy,Hastelloy,platinum-iridum,tungsten carbide etc |
Install method | flanged joint |
Temperature | -25°C ~+60°C |
Humidity | 50%~90% |
Protection grade | IP65 or IP68 |
Conductivity range | ≥5 μ s/cm |
Selection and matters needing attention:
1. Battery powered electromagnetic flowmeter must configure grounding ring,ensure good grounding.
2. If the meter is installed in the easily flooded position,or installation position may be water position in the rainy day,the best choice of split type electromagnetic flowmeter and IP68 protection grade,so as to avoid
because of rain water damage to the converter.
3. When the user in the selection of flow meter,try to make the flow velocity is larger than the above 0.5m/s,so both energy saving and can guarantee the best working range flowmeter.Please refer to the flow range table
4. For safety considerations,pulse output only for equipment calibration,KKF8240 electromagnetic flow
meter pulse output in the insulation is only functional insulation.This way please pay attention in selecting
the output.
5. KKF8240 series flowmeter have no 4~20mA signal output.
6. If using RS485 communications,need supply 5V DC power to flowmeter,otherwise the battery will be
difficult to long-time support for RS485 communication.
7. If you use the GPRS communication,need to buy the GSM module.The data is a message pack form
transmission to the network
Office Tel 0086-0411-83897455
Cell +86-15698851833(WhatsApp/skype/wechat)
Fax 0086-0411-83897355